Drywall panels — Atlanta, GA

Spackling small holes in drywall involves applying a small amount of patching compound directly into the hole. The pros use a putty knife to smooth the compound flush with the wall surface. Once dry, it's lightly sanded to create a smooth finish. For larger holes that require more structural integrity, drywall compound and often a patch piece are used instead of just spackle. The goal is always a smooth, paintable surface.

Soundproof drywall might be considered in Atlanta homes for specific rooms where noise reduction is a priority, such as home offices, media rooms, or bedrooms near noisy areas. This type of drywall is designed with denser materials or special dampening layers to absorb sound vibrations more effectively than standard drywall. The installation process is similar to regular drywall, but the material itself offers enhanced acoustic properties for a quieter environment.

Drywall corners are the internal and external angles where two walls meet. For internal corners, tape and drywall compound are applied to create a smooth, continuous surface. For external corners, corner bead (metal or vinyl) is installed and then covered with compound to create a sharp, durable edge that protects the corner from damage. Professionals ensure these corners are clean, straight, and ready for paint for a polished look in Atlanta homes.

Bulging drywall can result from moisture damage, loose fasteners, or improper installation. In Atlanta homes, if moisture is the cause, the source of the leak must be addressed first. The pros will then assess the bulge. They may reinforce loose fasteners or, if the drywall is significantly damaged, cut out the affected section and replace it.

Drywall sanding sponges are used to smooth out dried drywall compound after each coat has been applied. Professionals use them with light, even pressure to remove any high spots or ridges and to feather the edges, blending the repair with the wall. This process is repeated after each layer of mud dries. The sponges are effective for achieving a uniform smoothness, especially in tighter areas or for touch-ups, preparing the surface for primer and paint.

Fire-resistant drywall, often called Type X, is designed to provide a higher level of fire protection than standard drywall. It contains additives like fiberglass, helping it withstand fire for a longer period. In Atlanta, it's often used in areas where building codes require it, such as attached garages, multi-family dwellings, or certain commercial spaces. The pros can determine if this specialized material is necessary for your project to meet safety standards.