1/2 drywall — Deltona, FL
Last updated: September 24, 2026
What affects the price
Drywall projects vary based on a few main factors. The total square footage, the height of your ceilings, and the level of finish required—like smooth wall versus textured—are the biggest drivers. If your walls have significant water damage or require mold remediation, that adds complexity. Accessibility also matters; tight corners or areas requiring scaffolding take more time than open rooms. Exact pricing confirmed free on the call.
About this service
Half-inch drywall is the standard thickness used for most residential wall and ceiling applications. It provides enough structural integrity for typical interior rooms while being manageable to install. If your walls are damaged or you are finishing a basement, this is the most common material choice. The total cost is influenced by the number of sheets needed and access to the work area.
Frequently asked in Deltona
What type of drywall nails should I use?
For hanging drywall in Deltona, specific drywall nails are recommended. These nails have a thin shank and a flat, slightly countersunk head designed to minimize tearing the paper surface. They are driven in just deep enough to embed the head slightly below the surface, allowing for compound to cover them. Using the correct nails ensures a secure hold and a clean finish when the seams are taped and mudded.
How do I find reliable drywall contractors near me in Deltona?
What's the best way to patch a small hole in drywall?
For a small hole in drywall in Deltona, like from a nail or screw, the easiest method is to use a lightweight spackle or joint compound. Apply the compound with a putty knife, ensuring it's slightly overfilled to account for shrinkage. Once dry, sand it smooth until it's flush with the wall. For slightly larger holes, a self-adhesive patch can be applied before the compound for added support.
What are common drywall textures and how are they applied?
Common drywall textures in Deltona include orange peel, knockdown, and popcorn. Orange peel is applied with a spray gun, creating a mist-like pattern. Knockdown involves spraying a texture and then scraping off the high points for a flatter, stucco-like finish. Popcorn texture is sprayed on for a rough, cottage-cheese appearance. The application method varies greatly depending on the desired look and the tools used.
What is Level 5 drywall finishing?
Level 5 drywall finishing in Deltona represents the highest level of smoothness and uniformity for drywall surfaces. It involves applying a thin skim coat of joint compound over the entire surface of the drywall, including the seams and fastener heads, after the initial coats have dried and been sanded. This creates a perfectly smooth canvas, ideal for high-gloss paints or critical lighting conditions where imperfections would be highly visible.
How do I find a drywall company near me?
What are drywall sheets and what are they used for?
Drywall sheets, also commonly known as gypsum board or Sheetrock, are large panels used to create interior walls and ceilings in Deltona. They consist of a gypsum plaster core sandwiched between two layers of paper. These sheets are attached to wall studs and ceiling joists, and their seams are then taped and covered with joint compound to create a smooth, continuous surface ready for painting or other finishes.
Also serving nearby: Orlando · Palm Coast · Lakeland · Palm Bay · Gainesville
More on this: EPA renovation lead-safety — lead-safe work in pre-1978 homes.
Service area details
Serving all of Deltona — population 98,739; about 2,645 residents per square mile across 37.3 sq mi. ZIP codes covered include 32725, 32728, 32738, 32739.
Neighborhoods served in Deltona: Lake Helen, Orange City, Sanford, Winter Park, Altamonte Springs — and every surrounding area.
Areas we serve
Browse by state, then city.