Drywall bulge — Portland, OR

All-purpose drywall mud is a versatile joint compound suitable for a wide range of drywall tasks. It's commonly used for taping seams, filling nail or screw holes, and patching small to medium-sized holes. It adheres well and sands easily once dry, making it a popular choice for many repairs and installations. The crew that comes out will use the appropriate mud for your specific repair needs.

Sheetrock is a brand name for gypsum board, a common building material used for interior walls and ceilings. It consists of a gypsum core pressed between two layers of paper. Drywall sheets are attached to wall studs and ceiling joists, and then the seams and fastener heads are covered with joint compound and tape to create a smooth, continuous surface. The pros expertly install these panels for a flawless finish.

Bulging drywall typically occurs when moisture gets behind the drywall paper, causing it to swell, or when the drywall tape or mud has not adhered properly. In some cases, it can also be a sign of structural issues. The repair usually involves cutting out the damaged section, addressing any underlying moisture problems, and then patching with new drywall and compound. The pros can diagnose and fix the cause of the bulge.

A drywall sanding sponge is used to smooth out dried joint compound on drywall. They are flexible and can easily reach into corners and around edges where a regular sanding block might be difficult to use. Sanding is a critical step to ensure a smooth, even surface that will accept paint evenly. The specialist you'll speak with can explain the finishing process and the tools used.

Drywall corners are the angles where two walls meet or where a wall meets a ceiling. They can be either inside corners or outside corners. Inside corners are typically finished by embedding drywall tape into joint compound and then applying multiple coats of mud. Outside corners require a metal or vinyl corner bead to be installed and then covered with joint compound. The pros ensure these corners are sharp and durable.

Patching a hole in drywall involves cleaning the edges of the hole, applying joint compound around it, and then embedding drywall tape or a patch into the compound. Multiple thin layers of joint compound are applied over the patch, feathered out to blend with the surrounding wall. Each layer is allowed to dry and is then lightly sanded before the next coat. The crew that comes out will ensure the patch is invisible.